How To Repair An Ipad 2 Screen

iPad repairs aren't easy, but they aren't impossible either. So if yous didn't opt for AppleCare+ and an outright replacement isn't an option, replacing the screen yourself may be worth because.

Disclaimer: As with any repair, iMore cannot be held responsible for whatever damage you may do to your device. Information technology'due south also worth because that opening up your device to perform whatsoever repair or modification tin can and will void your Apple tree warranty. If y'all don't feel comfortable opening your device, don't. Employ extreme care and caution when performing a repair on any device.

What you need to perform an iPad 2 screen replacement

iMore recommends using only quality and genuine parts from a reputable supplier like iFixYouri. They accept quality parts, tools, and much more for all your repair needs.

• iPad ii (Wi-Fi or 4G model)
• Replacement digitizer
• Pilus dryer or estrus gun
• iPad opening tool
• iPad replacement adhesive kit
• Double zero (#00) Phillips screwdriver
• Metal spudgers
• iv-6 pry tools

Power off your iPad 2

Before performing whatever kind of repair on any device you should always power it off outset.

Take notation of caution areas

Underneath the digitizer of the iPad are a few caution areas you desire to watch out for. These areas have either sensitive cables or components that tin can be damaged very hands. So memorize where these areas are and motion extremely carefully when working effectually them.

Cellular antenna (3G models only)

Y'all'll but need to worry about the cellular antenna if you've got a 3G model. If you've got a Wi-Fi only model, this isn't a caution area for you.

Along the top you will find the cellular antenna. Information technology runs along both sides of the front facing camera. It can easily become attached to the adhesive on the underside of the digitizer and pull upward with it. To avoid this from happening yous'll want to use a pry tool to agree them down when prying around it. This ensures that it doesn't come up with the screen.

Power push button cable

The ability cable sits at the acme right of the iPad two and tin hands be knicked with a pry tool or iPad opening tool. You'll want to piece of work very charily around information technology to forestall tearing it. Y'all can encounter in the image how thin it really is. Taking intendance around it volition forbid issues with the ability button later reassembly.

Wi-Fi antenna

The Wi-Fi antenna in the iPad 2 is located along the bottom direct to the right of the Home button. But like the cellular antenna, it can get caught on the adhesive and exist pryed upwards with the digitizer when y'all're removing it. Make sure when you lot're working effectually this area that you are extra cautious not to tear it.

Digitizer cable

The digitizer cable is located towards the bottom left corner of the iPad about ii inches up. Even though you lot'll exist removing it and replacing it, notwithstanding take care not to push it too hard as information technology can push button into the LCD and damage it or pull upwards on components underneath the LCD. It'due south best to work effectually information technology.

Remove the cracked display

This is the most hard office of performing an iPad 2 or new iPad screen replacement as the screen is held in with goose egg but adhesive. Nosotros are going to have to oestrus information technology upwards to soften the adhesive and slowly remove it with our iPad opening tool. Make certain you perform this step extremely carefully and have your time.

Brand sure y'all have made a good mental note of the caution areas mentioned higher up.

1. The best place to start is the lower left manus corner of the iPad. Use your heat gun to heat upwardly this expanse. Employ circular motions about an inch from the surface of the iPad and don't stay in any i area too long.

2. Now take your iPad opening tool and very carefully insert information technology in between the digitizer and plastic frame right beneath where the digitizer cable should be. Accept great care non to push too difficult or stick the pry tool under too far as yous will nick the LCD. If the pry tool does not want to slide in easily, rut upward the iPad a chip more than.

3. Once you've got your pry tool inserted, gently rock information technology back and forth in club to break the adhesive effectually information technology. There is also a cream blazon of adhesive that runs effectually the LCD that needs to interruption. Looking at eye level you will be able to run into information technology separate.

4. After a tiny section is complimentary you tin can sideslip a plastic pry tool underneath it to agree it upward.

5. At present move on to the next department and repeat taking care non to damage any of the caution areas we mentioned previously. Depending on how bad the iPad is croaky and where, y'all may have to jump around and heat upwards unlike areas and piece of work your way effectually in opposite directions. If glass breaks, that'due south ok. Simply brand sure not to ever bend information technology in the management of the LCD.

This is the longest process and the well-nigh tedious. Take your time and brand sure each area is heated thoroughly before you lot motion to some other section or effort to remove the digitizer.

Once you lot think yous've gotten all or almost all of the agglutinative broke nosotros tin pry up the digitizer.

1. Advisedly lift upwards the right side of the digitizer in club to swing information technology to the left. Be conscientious to wath the circumspection areas to make sure they aren't being pulled up forth with the cleaved digitizer. If they are, suspension the adhesive property them onto the screen before prying whatsoever further.

2. In one case the digitizer is completely separated from the frame you can go ahead and cut the digitizer cable with a pair of scissors to remove it from the iPad. Don't throw it abroad simply still as we will demand a few things off of it in a later step.

Remove the LCD associates

Before nosotros keep any farther into cleaning out the frame, we want to get the completely exposed LCD out of the way and place it somewhere safe.

1. Remove the 4 screws in each corner of the LCD with your #00 Phillips screwdriver.

2. Use a pry tool to grab hold of the LCD along the right side and gently elevator information technology up simply not all the way out as the cable is still fastened.

3. With the LCD lifted with one hand, use the other to gently pull up on the LCD cable. There is a tiny flake of adhesive holding it into the iPad. Don't pull up hard though as the LCD is withal fastened.

4. Now use your pry tool to lift upward the clasp holding the cable in place and slowly back the LCD cablevision out of its socket.

5. Place the LCD somewhere you know is safe until we are set to place it back in the iPad.

Remove what is left of the former digitizer cable

1. Flip up the two clasps that concord the two sides of the cable in identify.

2. Slowly back the end of the digitizer cable out of the socket and discard information technology.

Clean out the frame of the iPad

Before moving on you'll about likely accept a lot of glass and left over adhesive in the frame. Y'all will demand to remove all of information technology earlier placing in a new associates.

If yous need to, use your heat gun in gild to heat up any left over adhesive on the frame to arrive easier to peel off. There'due south really no prissy and tidy way to practise this. Use a pry tool or metal spatula to whittle away the excess broken glass and adhesive.

Once you are positive that the entire frame is free of old agglutinative and cleaved glass, we can move on.

Ready the new assembly

You'll only need to utilize this footstep if the new digitizer assembly you ordered did not come up with the Home button and photographic camera hold pre-assembled onto the new one. If it did, skip this step and movement on. If it didn't, go on reading this section.

Remove the post-obit items with your pry tool off the old digitizer assembly taking care non to bend them.

• Home button bracket
• Home button
• Camera hold (located at the superlative of the digitizer where the front facing photographic camera would sit underneath information technology)

Place the Home push on the new assembly

1. Start by placing the actual Habitation push button on the new assembly. Employ the border of the frame to make sure it is lined upward correctly and straight.

2. Once yous've gotten the new Domicile push lined up correctly, flip information technology over to brand sure that it'south straight in the frame. If it's not, adjust it accordingly.
3. Make certain the adhesive is pressed down all the mode then it doesn't come loose.
4. Now identify the Home push bracket on tiptop of the Home push button adding more adhesive if you lot demand to (y'all probably will). Any type of potent two-sided adhesive will work.

5. Again, utilise the edge of the frame to brand sure the bracket is lined up straight and directly over the Home button and press down firmly.

6. Flip over the assembly and exam it by pushing downwards on the Dwelling house button. If the Dwelling button depresses commonly similar it should and feels okay, you've got it on correctly.

Identify the camera hold on the new assembly

To put the camera hold on the new assembly, apply new adhesive to the dorsum of it if necessary (again, it's recommended). Use the height of the frame to make sure information technology's lined upwardly correctly and push button downwardly firmly.

To brand sure information technology's in correctly, you lot can always lay it down carefully in the iPad frame and make certain the top lines up without getting caught up on anything around the camera concord.

Apply new adhesive to the iPad frame

If you take ordered a new iPad digitizer that already has the agglutinative applied, you lot tin can skip this footstep.

1. Start in any corner you'd like and start carefully laying the new agglutinative around the edge of the screen. Pre-cut strips work the all-time but y'all may cut your own every bit well.
2. Make sure yous don't embrace up any components around the Dwelling button area that shouldn't exist covered. Also take care effectually wires so you don't nick or cover them in adhesive.
3. Once you're done applying the new adhesive, don't pare off the backing of it just yet.

Attach the new digitizer associates

1. Once y'all've gotten the new assembly gear up to go nosotros tin can attach it to the iPad.
2. Carefully insert the 2 ends of the digitizer cable into the socket y'all removed the old one from. In order to go the cable to fit correctly, role of the cable will demand to be tucked underneath the metallic frame.

3. Most replacement cables will accept white lines on each side. Make certain the digitizer cable is pushed in to or a piffling past the white lines or the touch screen may not fully respond.
4. Once you're certain the cable is pushed in all the way you lot tin use your pry tool to snap back downwards the clips that concord it in place.

Supplant the LCD assembly

1. Just like you fastened the digitizer assembly, advisedly re-attach the LCD associates in the same way.
2. Make sure the cable is pushed all the way in. One time it is, fasten the clip that holds it into place.

3. Lay the LCD into identify carefully and supervene upon the iv screws effectually the edge of the LCD.

Test the digitizer assembly

Before peeling off the backing to the agglutinative, at present is a perfect fourth dimension to test the assembly instead of waiting until you've stuck down the screen with agglutinative before realizing it's lacking.

Gently flip over the digitizer and power on the iPad. Once the slide to unlock screen comes up, go ahead and slide your finger to unlock to brand certain the screen responds to touch on. Tab through the Abode screens for a infinitesimal to brand sure everything is working like normal.

If everything is in good shape, go alee and hold down the ability button and slide to power off again.

If you had issues, double-bank check the digitizer cable again making absolutely sure it'south all the way in place and secured. If y'all nonetheless have no touch capability, you may have a lacking unit and need to transport it back. This is very uncommon if you've used a good supplier that offers quality parts. It does happen from time to fourth dimension though. If this is the case, place your iPad somewhere safety until the supplier sends you a new replacement digitizer associates.

Remove adhesive backing, protective shields, and secure the new digitizer

This part can be a bit catchy also so make sure you're careful and that you lay the digitizer downwards very advisedly.

1. Pull the backing off all the agglutinative taking intendance around the digitizer cablevision and making sure that the cable doesn't get stuck. Now remove the protective backing off the inside of the digitizer that protects the screen from getting dust on the inside.
2. Carefully flip the digitizer into place making sure that you lot are lining up the frame at the top and the bottom. Pay specific attention around the front-facing camera and by the bottom around the Home push. Test the Home button and make sure it depresses ok and wait at the front-facing camera to make sure it'due south lined upwards correctly.
3. Continue working your mode around the frame gently pushing it into place.
4. The bottom left corner where the digitizer cable sits may need a fleck of extra pressure level to make certain it secures over the cable.
5. One time you're satisfied with how the digitizer is sitting, pull out your heat gun and gently heat around the frame one last time.
6. Use a cleaning cloth so you don't burn down your fingers and slowly work your way around the frame applying even pressure in each section to secure the digitizer to the frame. I'd recommend heating up minor portions at a time and holding each department downward for 30 seconds until y'all've made your way around the entire iPad.

And ...washed!

Once you lot've made sure the digitizer is secure you tin can go ahead and power on your iPad 2. If all was washed correctly, y'all should now have a working iPad ii again without a shattered screen.

This ranks equally i of the hardest most ninja level iOS device DIY repairs so if you succeeded, give yourself a huge pat on the back. The good news is, if yous performed this repair with groovy results, yous shouldn't have any issue performing any other iPhone or iPod touch repair in the future.

More than DIY help and how to's

If y'all run into issues with this repair or demand additional input or help, our mod and DIY repair forums are a great place to start.

How To Repair An Ipad 2 Screen,

Source: https://www.imore.com/how-replace-cracked-screen-ipad-2

Posted by: pannellcapent.blogspot.com

Share this post